Settings On The - Leister UNIROOF AT Mode D'emploi

5. Settings on the UNIROOF AT/ST
5.1 Adjust welding nozzles
A = 42 mm +/− 2
B = 1 – 2 mm
C = 1 mm
Retool the drive/pressure roller (8) and welding nozzle (9) to match the desired welding width as needed (see
Retooling for di erent welding width).
3 × socket head screws
48
A
3 × socket head screws
4 × Torx screws
B
Set dimension «A» (3 socket head screws)
Set dimension «B» (3 socket head screws)
Set dimension «C» (4 Torx screws)
C