Display; Display Symbols Of The Status Display (Display 40) - Leister UNIROOF AT Mode D'emploi

8.2 Display

40
41
42

8.3 Display symbols of the status display (Display 40)

The Status display is subdivided into a left-hand (1) and a right-hand area (2).
Status display 1 / Left
Profi le name
• Displays the name of the selected currently valid welding profi le (e.g. Basic).
• If a profi le name contains more than 6 characters, the fi rst 6 characters are shown fi rst, one after the other,
followed by the remaining 6 characters. The system presents the fi rst 6 characters afterwards.
Voltage
• If there is overvoltage or undervoltage in an electrical current network, the voltage will be displayed.
Status display 2 / Right
General Warning note
(see also Warning notes / Symbols for warning and error messages)
Key block is activated.
Heating is switched on.
Note regarding undervoltage in the electrical current network.
Note regarding overvoltage in the electrical current network.
58
The display is subdivided into three display areas:
40. Status display (areas 1/left + 2/right)
41. Working display
42. Menu selection