Your Uniroof At/St; Type Plate And Identification - Leister UNIROOF AT Mode D'emploi

4. Your UNIROOF AT/ST

4.1 Type plate and identification

The model designation and the series marking are included on the type plate (20) of your device.
Enter this information into your operating instructions and always reference this information when addressing
inquiries
to our representatives or authorized Leister Service points.
Model:..............................................................................................................................................................
Serial number: ..................................................................................................................................................
Example:
4.2 Scope of delivery (standard equipment in the case)
1 × UNIROOF AT/ST device
• 1 × Weight, laterally mounted
• 1 × Weight, laterally hooked in
• 1 × Weight, mounted at rear
• Movable transport axle, 220 mm, mounted
• Guide bar, folded in
• Upper handle, separate in the case
1 × Wire brush
2 × Welding protection plate
1 × Hexagon wrench key, Size 4
1 × Original operating instructions
1 × Translation of operating instructions
1 × Main catalog
1 × Folder
45