Transport - Leister UNIROOF AT Mode D'emploi

3. Transport

Comply with applicable national statutes regarding the carrying or lifting of loads!
The weight of your UNIROOF AT/ST including transport box is 21.5 kg
(17.5 kg without transport box including 3 weights).
Two persons are required for transportation with the transport box.
Use only the transport box included in the scope of delivery (see scope of delivery) and the handle
fi tted on the transport box for transporting the hot air welder.
44
Do not fail to allow the hot-air blowers (10) to cool down su ciently prior to
transport (see Cool-Down-Mode, UNIROOF AT).
Never store fl ammable materials (e.g. plastic, wood or paper) in the transport
box!
Never use the carrying handle (5) on the device or on the transport box for
transporting with a crane!
Never raise up the hot air welder by the additional weights (7)!
24
22
To lift up the hot air welder by hand, use the
carrying handle (5).
5
To position the hot air welder, press the
guide bar (22, 24) and then roll it this way
into the desired welding position.