Leister UNIROOF AT Mode D'emploi page 51

40 mm drive/pressure roller (8)
Cheese head screw
M4 × 12
27 26
Cheese head screw M5 × 16
27
26
27
Cover plate
Spacer block
Intermediate ring
Downholder belt
Intermediate ring
Drive/pressure roller
Step 3: Insert intermediate piece for
downholder belt
1. Remove the downholder belt (26).
2. Undo the two M5 x 16 cheese head
screws.
3. Remove the defl ection roller
assembly (27).
4. Mount the spacer block (20 or 30 mm)
with the two M5 x 16 cheese head
screws.
8
5. Mount the defl ection roller
assembly (27).
6. Retighten the two M5 x 16 cheese head
screws.
7. Mount the downholder belt (26).
8
20 mm drive/pressure
roller (8)
51