Leister UNIROOF AT Mode D'emploi page 67

9.15 Duty Info (available only via Advanced Mode)
Under Duty Info you will fi nd information regarding the capacity utilization of your UNIROOF AT.
Use the Up/Down arrow keys (30) to access the Settings menu and confi rm your selection with button (33). Now
use the Up/Down arrow keys (30) to set the Advanced Mode to On and then select Duty Info.
9.16 General Info (available only via Advanced Mode)
9.17 Machine Setup (available only via Advanced Mode)
Use the Up/Down arrow keys (30) to access the Settings menu and confi rm your selection with button (33). Now
use the Up/Down arrow keys (30) to set the Advanced Mode to On and then select Machine Setup.
9.18 Reset to defaults (available only via Advanced Mode)
Use the Up/Down arrow keys (30) to access the Settings menu and confi rm your selection with button (33). Now
use the Up/Down arrow keys (30) to set the Advanced Mode to On and then select Reset to defaults.
Hours Drive: Current runtime of the drive
Hours Blower: Current runtime of the blowers
Hours Machine: Current runtime of the machine
Day Distance: Distance covered during on today's date (can be reset)
Total Distance: Distance covered since commissioning of the device
Under General Info can be found version information regarding the software of the ma-
chine and/or of the communication module (display) in addition to information regarding
the date of production.
Use the Up/Down arrow keys (30) to access the Settings menu and confi rm your selec-
tion with button (33). Now use the Up/Down arrow keys (30) to set the Advanced Mode
to On and then select General Info.
Select Unit: Setting the measurement system (metric or imperial/Anglo-American)
LED Mode: Factory setting, cannot be changed (OFF=
LCD Contrast: Adjusting the LCD display contrast
LCD Backlight: Adjusting the LCD display background illumination
Key Backlight: Adjusting the background illumination keyboard Control panel (2)
This function can be used to reset all of the individually set values back to the factory
settings. The reset a ects not only settings (Setup) but also profi les.
Confi rm your selection with the button at the lower left (Reset to factory settings/Reset).
67