13. Quick Reference Guide UNIROOF ST
Switch on / Start
1. Connect the mains voltage plug
2. Switch on the main switch (19)
3. Select/set the welding profi le
4. Use the Direct heating button (35) to switch on the heating
/ note LED (stops fl ashing)
5. Swivel the hot air blowers (10) downwards
(machine starts automatically)
Switching off
1. Swivel the hot-air blowers (10) upwards
(machine stops)
2. Use the Direct heating button (35) to switch o the heating.
3. Switch o the main switch (19)
4. Pull out mains voltage plug
14. Control panel of the UNIROOF ST
30
33
36
74
Temperature graph for 100% air volume
and 230 V nominal voltage
31
32
35
34
30. Drive potentiometer
31. Drive status LED
32. Direct drive button
33. Potentiometer heating
34. Heating status LED
35. Direct heating button
36. Potentiometer blowers