Your Hemtek St / K-St; Type Plate And Identification; Scope Of Delivery (Standard Equipment) - Leister HEMTEK ST Notice D'utilisation

4. Your HEMTEK ST / K-ST

4.1 Type Plate and Identification

The model and serial number are indicated on your device's type plate (8).
Enter this information into your operating instructions and always reference this information when addressing inquiries
to our representatives or authorized Leister Service points.
Model:..............................................................................................................................................................
Serial no.: .........................................................................................................................................................
Example:

4.2 Scope of delivery (standard equipment)

HEMTEK ST
1 × HEMTEK ST device
• Table fastening console
• HEM material guidance
• Scraper
• Silicone plugs
1 × Original operating instructions
1 × Translation of operating instructions
1 × Main catalog
1 × Folder
20
The hot-air blowers (1) MUST be allowed to cool down prior to transport.
Never use the carrying handle (2) on the device for transporting with a crane.
Never use the hot-air blowers (1) to lift the hot-air welding machine.
2
1
To lift the hot air welder by hand, use the
carrying handle (2).
HEMTEK K-ST
1 × HEMTEK K-ST device
• Table fastening console
• Flap-piping guide
1 × Original operating instructions
1 × Translation of operating instructions
1 × Main catalog
1 × Folder