Display Description - Leister GEOSTAR G5 Instructions D'utilisation

Operating unit description

Display description

Status display "Section 1" (35)
Name of the
saved value
230 V
Status display "Section 2" (36)
Warning present
(see Chap. Warning & Error messages)
Key lock
(only with active key lock)
Function and working display
• In the function and working display, it is always the highlighted fi eld/symbol of the current selection that is defi ned.
Function display (33)
Symbol Meaning
Select freely defi nable and predefi ned
profi les
Settings
Return to working display
(exits a menu directly)
Go back one level
Reset settings or hour counter
44
Set value is adopted
Press
straight away and
"e-Drive"
the selection jumps
(32)
straight back to the
function display
Rotate
Setting the desired
"e-Drive"
setpoints in 5 °C or
(32)
0.1 m/min increments
Profile currently selected. If profile names consist of more than 6 characters, the
first 6 characters are shown first, followed by the remaining characters.
Network voltage currently present on the mains plug.
Selected
function is
executed.
Changing the
position in the
Function display.
Undervoltage
Heating
(only with activated heating)
Symbol Meaning
Service menu
(can only be accessed by entering the
password)
Save
Delete the selected item
Edit the selected item
Selection of the marked
position.
• Changes the position
within the Setup menu
• Setting the value of
the selected position
Overvoltage