Leister GEOSTAR G5 Instructions D'utilisation page 38

Operating Instructions
GB
We congratulate you on the purchase of a GEOSTAR wedge welder.
You have selected a fi rst-class wedge welder comprised of high-quality materials. This device was developed
and produced in accordance with the latest welding technologies. Every GEOSTAR is subjected to strict quality
monitoring before it leaves the factory in Switzerland.
Read the operating manual carefully before commissioning
and keep it on hand for later consultation.
Leister GEOSTAR G5/G7
Wedge welder
Application
• GEOSTAR G5/G7
Lap welding and assembly of fi lms and sealing sheets.
Overlap width max. 150 mm.
• Welding profi le
Weld profi le in accordance with DVS* 2225 Part 1 and Part 4, ASTM, TWI and most other Norms and National
standards are produced. Other dimensions possible as needed.
*DVS: Deutscher Verband für Schweisstechnik (German Welding Society)
GEOSTAR G5
Copper
Steel
GEOSTAR G7
Copper
Additional materials upon request
For welding materials made of PVC, a device model designed for that purpose with steel wedge must
be used.
38
(Translation of the original operating instructions)
Material
PE-HD, PE-LD, PP, TPO, FPO
PVC-P
Material
PE-HD, PE-LD, PP, TPO, FPO
Material thickness reference value
0.8 – 3.0 mm
0.8 – 3.0 mm
Material thickness reference value
1.0 – 3.0 mm