Leister GEOSTAR G5 Instructions D'utilisation page 39

Warning
Danger to life when opening the device as live components and connections are
then exposed. Pull the mains plug from the outlet before opening the device.
Danger of fire and explosion with improper use of wedge welding devices, parti-
cularly in the vicinity of flammable materials and explosive gases.
Risk of burning! Do not touch the welding wedge when it is hot.
Allow the device to cool down.
Connect the device to an outlet with a protective ground. Any interruption of the
protective conductor inside or outside the device is dangerous!
Use extension cables with protective conductors only!
Moving parts may not be touched. The danger exists of inadvertently becoming
caught and being pulled in.
Caution
The nominal voltage specified on the device must match the mains voltage.
The main switch must be switched off in the event of a mains voltage failure.
IEC/EN 61000-3-11; Zmax = 0.156Ω + j0.098Ω. Consult electricity supply com-
pany if necessary.
An FI switch is urgently required for personnel protection when the device is used
FI
at construction sites.
Device is not permitted to be operated unsupervised. Heat can reach flammable
materials that are not in view.
Device may be used only by trained specialists or under their supervision. Child-
ren are not permitted to operate the equipment under any circumstances.
Protect the device against humidity and dampness.
39