Leister GEOSTAR G5 Instructions D'utilisation page 58

Deleting the day's distance
• In the function display (33) by rotating the "e-Drive"
• Press "e-Drive"
• Selecting "Show Duty Info" in the "Setup" menu rotating the "e-Drive"
• Rotating the "e-Drive"
• Symbol for hours counter is highlighted and confi rm by pressing the "e-Drive"
• Day's distance is deleted.
• In the function display (33) rotating the "e-Drive"
Key lock
The key lock is activated or deactivated by simultaneously pressing "Up" and "Down" keys (27/28) for at least
2 seconds.
Profile selection
• The GEOSTAR has ten freely defi nable profi les.
• Selecting the symbol
be selected with the keys "Up" and "Down" (27/28) and confi rmed by pressing the "e-Drive"
• If setpoints (profi les 2–10) are changed during operation, they will not be saved in the profi le.
• Every time the machine is switched on/o , the values defi ned in the profi le will reappear.
• The currently selected profi le can be seen on the left in the status display "Section 1" (35).
• If you would like to use the last set values when you switch on the machine again, you must select the BASIC
profi le.
• If the "BASIC" profi le is selected, then the "BASIC" profi le will not appear in the "Section 1" status display (35),
but instead the voltage that is present on the device.
58
briefl y.
to select "Day Distance" and pressing "e-Drive"
in the function display (33) takes you to the "Select Profi le" menu. The profi les can
35
to select the Settings
to select the symbol "Return to working display"
Profile name
menu.
and pressing it briefl y
briefl y.
.
Voltage display
35
.
.
.