Taking Down The String Inverter - Bosch BPT-S 3 Manuel De Service

98 | Maintenance and disassembly
CAUTION
WARNING
NOTICE
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
7.4

Taking down the string inverter

Risk of burns due to high temperatures
Metal surfaces on the back of the device (e.g. heat
sink) can heat up to 100 °C and can cause burns.
Do not touch metal surfaces

After switching off the device, always wait for a

period of 30 minutes before touching any
components
Risk of injury due to incorrect disassembly
If you do not have a firm and secure footing when
disassembling the equipment (ladders, dismantling
above head height), serious injury or death can result.
Do not drop/allow the device to fall

Ensure a safe and stable position

Work in a way that will protect your back

Material damage due to setting down the device
If the device is set down on its front or outer edges,
the housing can be scratched or damaged.
Only set the device down on the rear side

Prerequisites
 Cables are disconnected
▶
Procedure
1. If necessary, remove the anti-theft padlock
2. Take the string inverter off the wall
3. Only set string inverters down on the rear side
■
String inverter is removed.
English
Bosch Power Tec GmbH