Bosch BPT-S 3 Manuel De Service page 179

English
Bosch Power Tec GmbH
4. Bend the stripped rigid cable around the screw
(180° curve) using pliers
Stripped rigid cable (1), flat-head screw M6 (2),
5.1:
pliers (3)
5. Screw together into the PE connection on the
device, thus fixing the cable in place
(3)
(2)
(1)
5.2: Connecting the earthing set
[1]
PE connection
[2]
Rigid cable
[3]
Terminal plate
[4]
Detent edged washer
[5]
Flat-head screw M6
6. Tighten the screw in place and clamp the rigid
cable between the plate and PE connection
(3)
(2)
(1)
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Installation | 61
(5)
(4)