Bosch BPT-S 3 Manuel De Service page 208

90 | Commissioning
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Prerequisites
Service switch is in position 1 and AC cabling is in

place
The string inverter is switched on

The one end of the Ethernet cable is inserted in the

string inverter and the other end of the Ethernet
cable is inserted in the laptop/PC.
▶
Procedure
1. Move the service switch on the string inverter from
0 to 1
2. Enter the serial number of the device or edata
directly in the address line of the web browser in
place of an Internet address (serial number is on
the type plate)
The home page appears initially in English. After
selecting the language, the home page appears in
the selected language.
6.5: Example: Indicated web page in the web browser
[1]
Setting the language
[2]
Set the country
[3]
Set the grid standard
(1)
(2)
(3)
(4)
English
Bosch Power Tec GmbH