Connecting The Solar Generator Cable (Dc Cable) - Bosch BPT-S 3 Manuel De Service

English
DANGER
Bosch Power Tec GmbH
5.11: AC mains plug and AC connection connected
5.1.4 Connecting the solar generator cable (DC
cable)
Materials required
 Slotted screwdriver (blade width 3 mm)
15 mm spanner (specification in mm)

Sockets/plugs for DC+ and DC– (included in the

delivery)
Risk of fatal injury when working on a live system
When working on a live system there is a risk of
electric shock, which can result in death or serious
injury.
Do not work on a live system

 If there is no alternative: Only work on live
components if you have the appropriate additional
qualification, and use protective equipment. Please
note the applicable standards and regulations.
By measuring the voltage on the solar generator, you
can determine possible causes of faults (cabling, part
shadowing or defective solar modules) and rectify
these before installing the device.
Solar generator cables must not be earthed. The
device measures the insulation resistance during
commissioning.
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Installation | 71