Selecting Screws; Mounting The Wall Bracket And Device - Bosch BPT-S 3 Manuel De Service

English
Bosch Power Tec GmbH
4.5.1

Selecting screws

4.2: Screws: Required dimensions
a = 9 mm (hole diameter for wall bracket)

 b = 6 to 8 mm (screw diameter)
c = 15 to 20 mm (screw head outer diameter)

d = max. 20 mm (washer outer diameter)

e = max. 10 mm (total height of screw head and

washer)
4.5.2

Mounting the wall bracket and device

▶
Procedure
1. Remove the wall bracket and accessories from the
packaging. Please note the following here: Wall
bracket is packaged separately.
Transportation and installation | 47
a b
e
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
c d