Information On Selection Of Country - Bosch BPT-S 3 Manuel De Service

English
Bosch Power Tec GmbH
[4]
Confirm the settings
3. Select the language
4. Select the country
5. Select the grid standard
6. Confirm the settings: Click on Finish, then on Send
settings
■
The data (language, country, grid standard) is
transferred to the device:
 When the data is being transferred, white LEDs light
up permanently.
Once the data has been transferred, the LEDs light

up in a blue circular pattern for three seconds.
The configuration is now complete.
6.6

Information on selection of country

Selecting the country sets a country-specific set of
parameters. The manufacturer has defined country-
specific parameter sets in line with country-specific
standards.
On the day of commissioning, you have the option to
select another country with the corresponding
parameter set. Start the string inverter using the
service switch by briefly switching it off and on again.
If you have set the incorrect country during initial
start-up: Switch the service switch off and back on
again. Then enter the correct country.
The string inverter only works if a set of parameters is
set. If you want to use the device in a country that is
not listed in the display: Contact Bosch Power Tec
Service (see contact details on the back of the
manual).
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Commissioning | 91