Bosch BPT-S 3 Manuel De Service page 177

English
NOTICE
NOTICE
NOTICE
Bosch Power Tec GmbH
Material damage due to incorrect AC connection
An incorrect AC connection can result in overvoltage
or an overloaded cable and consequently the risk of
fire.
Use a strain relief for cables in the connection area

Connect the device and electric loads to separate

circuit breakers (automatic circuit breakers)
 Only connect one conductor (stripped cable) per
terminal
Observe the correct wire stripping length

Material damage due to incorrect DC connection
and AC connection
If the DC cables and AC cables are bent beyond the
minimum permitted bending radii, the cables may
break and both the plug/socket and the seal may be
damaged.
 Observe the minimum bending radii of the DC cable
and AC cable
Absorb mechanical loads before they reach the

plug/socket (e.g. using cable ties)
Material damage due to modifications to the device
The device can be damaged by modifications to the
device.
Do not modify or paint the device

Avoid contact with paints, thinners, etc.

Do not over-stress the service switch

Do not open the device

Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Installation | 59