Safety Signs On The Device - Bosch BPT-S 3 Manuel De Service

English
Bosch Power Tec GmbH
 Before any electrical work is performed, suitable
measuring equipment is used to ensure that the
device is fully de-energised, both on the DC side and
AC side, in accordance with applicable directives.
Please note the following here:
– The solar generator is live during daylight.
 Measurements must only be taken using suitable
measuring equipment which conforms to the
applicable standards and directives
The device is not opened

2.3

Safety signs on the device

Indicates a hazard
Indicates a hazard resulting from an excessive touch current if
a protective earth has not been installed correctly
Indicates risk of injury due to hot surfaces
Denotes the disposal: Device must not be disposed of as
household waste. Device must be disposed of correctly in
accordance with national regulations.
Indicates transformerless device
Refer to the operating manual
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Safety | 13