Connecting The String Inverter To The Ethernet - Bosch BPT-S 3 Manuel De Service

80 | Installation
(2)
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
4. Press the spring down to open
(1)
Spring (1), DC plug housing (-) (2), DC socket
5.18:
(+)housing (3)
■
DC plug/DC socket is opened and dismantled.
5.1.6 Connecting the string inverter to the
Ethernet
Materials required
Ethernet cable with the following characteristics

– Cable category CAT.5e or better
– Shielded FTP cable (Foiled Twisted Pair)
– UV-resistant
– Temperature-resistant: -20°C to +60°C
– Shielding up to the tip of the plug
Prerequisites
Mounted and connected string inverter

Ethernet socket with internet access (e.g. router or

PC). For smooth operation, ports 80, 123 and 5222
must be activated in any existing firewall.
(3)
(1)
Bosch Power Tec GmbH
English