Safety Instructions For Assembly/Disassembly - Bosch BPT-S 3 Manuel De Service

English
WARNING
WARNING
Bosch Power Tec GmbH
4.2 Safety instructions for assembly/
disassembly
Risk of injury due to incorrect mounting/
disassembly
Incorrect assembly/disassembly can cause the device
to fall and be damaged. Commissioning/
recommissioning the damaged device can result in
serious injury or death.
Do not damage external components (inductors,

cooling fins, connection area, plugs, etc.)
Use suitable and sufficient materials for anchoring

the underside (screws, screw anchors)
Only install the device on a wall that has sufficient

load-bearing capacity (not plasterboard or anything
similar)
Do not place the device on dirty ground (mud,

puddles)
 Do not forcibly remove the anti-theft protection
(padlock)
Risk of fatal injury due to an unsuitable installation
location
An unsuitable installation location (e.g. potentially
explosive environments/near highly flammable
materials) can result in the risk of explosions/fire and
serious injury or death when the device is operated.
Do not install the device in areas at risk of explosion

(e.g. fine particles such as powder or dust)
 Do not install the device near highly inflammable
substances (e.g. fuels, paints, etc.)
Transportation and installation | 39
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual