Bosch BPT-S 3 Manuel De Service page 172

54 | Installation
DANGER
DANGER
WARNING
Bosch BPT-S 3 / 3.68 / 4 / 4.6 | Operating manual
Risk of fatal injury due to incorrect DC connection
(incorrect plug/socket, incorrect cable
terminations)
Using unauthorised plugs/sockets or incorrect cable
terminations for the SUNCLIX plugs/sockets may
result in potentially fatal electric shocks, overheating
and fire.
Only use the SUNCLIX plugs/sockets that are

supplied. In case of loss or if replacement parts are
required: Only order original parts. Contact Bosch
Power Tec Service (see contact details on the back
of the manual).
Correctly assemble the SUNCLIX plugs/sockets: do

not reverse the polarity, insert the strands far
enough, and audibly lock the spring contact into
place
Risk of fatal injury due to unplugging the DC plugs/
sockets under load
Removing the DC plugs/sockets under load can result
in potentially fatal arcing. These lead to potentially
fatal electric shocks and burns.
Never remove the DC plugs/sockets under load

Risk of injury due to modifications to the device
Modifications to the device can cause serious injury
or death.
 Only use the device in its original condition
Do not open the device

Do not carry out any mechanical changes on the

device (do not drill the device)
Do not modify or paint the device

 Avoid contact with paints, thinners, etc.
Do not over-stress the service switch

English
Bosch Power Tec GmbH