Safety Instructions For Batteries - Roller Uni-Press E Notice D'utilisation

eng
b) Do not use the power tool if the switch does not turn it on and off. Any power
tool that cannot be controlled with the switch is dangerous and must be repaired.
c) Disconnect the plug from the power source and/or the battery pack from
the power tool before making any adjustments, changing accessories, or
storing power tools. Such preventive safety measures reduce the risk of starting
the power tool accidentally.
d) Store idle power tools out of the reach of children and do not allow persons
unfamiliar with the power tool or these instructions to operate the power
tool. Power tools are dangerous in the hands of untrained users.
e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use. Many
accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with
sharp cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits etc. in accordance with these
instructions, taking into account the working conditions and the work to
be performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger
that is suitable for one type of battery pack may create a risk of fire when used
with another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that
can make a connection from one terminal to another. Shorting the battery
terminals together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additionally seek medical help. Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only
identical replacement parts. This will ensure that the safety of the power tool
is maintained.
Safety instructions for presses
WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
● Hold the power tool firmly by the housing grip (6) and pistol grip (9) and
make sure you are standing firmly when working. The power tool produces
a very high pressing force. It is safer to hold the tool with both hands. Therefore
be very careful. Keep children and bystanders away while operating the power
tool.
● Do not reach into moving parts in the pressing area/expanding area. There
is a risk of injury by crushing fingers or hands.
● Never operate radial presses with the tong retaining bolt unlocked (2). There
is a risk of fracture and flying parts can cause serious injuries.
● Always position the radial press with pressing tongs, Mini pressing tongs,
pressing ring with adapter tongs on the press fitting at a right angle to the
pipe axis. If the radial press is positioned askew to the pipe axis, its high drive
force will pull it to a right angle to the pipe axis. This could crush hands or other
parts of the body and/or there is a risk of fracture whereby flying parts can cause
serious injuries.
● Do not start radial presses without pressing tongs, Mini pressing tongs or
pressing ring with adapter tongs. Do not start the pressing process except to
make a press joint. Unless counter pressure is applied by the press fitting, the
drive unit, pressing tongs, Mini pressing tongs, pressing ring and adapter tongs
will be needlessly stressed.
● Before using pressing tongs, pressing rings with adapter tongs (pressing
jaws, pressing slings with adapter jaws) from other manufacturers, check
whether these are suitable for the ROLLERʼS radial presses. Pressing tongs,
pressing rings with adapter tongs from other manufacturers can be used in
ROLLERʼS Uni-Press, ROLLERʼS Uni-Press ACC, ROLLERʼS Multi-Press and
ROLLERʼS Multi-Press ACC if they fit mechanically into the ROLLERʼS drive
unit, can be locked properly and are suitable for the radial press thrust. Also read
and observe the instruction manuals and safety instructions of the respective
manufacturer/supplier of the pressing tongs, pressing rings with adapter tongs
and the installation and assembly instructions of the manufacturer supplier of the
press fitting system to be pressed and observe any restrictions for use that are
specified there. Failure to do so could lead to fracture and flying parts can cause
serious injuries.
Pressing tongs, pressing rings with adapter tongs (pressing jaws, pressing slings
with adapter jaws) from other manufacturers are not approved by ROLLERʼS for
ROLLERʼS Uni-Press E, ROLLERʼS Uni-Press SE.
● Only operate the axial press with pressing heads fully inserted. There is a
risk of fracture and flying parts can cause serious injuries.
● Always screw expanding heads as far as they will go onto the expander.
There is a risk of fracture and flying parts can cause serious injuries.
● Use only undamaged pressing tongs, Mini pressing tongs, pressing rings,
adapter tongs, pressing heads and expanding heads. Damaged pressing
tongs, Mini pressing tongs, pressing rings, adapter tongs, pressing heads and
expanding heads can jam or fracture and/or the press fitting will be faulty. Do not
attempt to repair damaged pressing tongs, Mini pressing tongs, pressing rings,
adapter tongs, pressing heads and expanding heads. There is a risk of injury.
● Pull out the plug or remove the battery before assembly/disassembly of
pressing tongs, Mini pressing tongs, pressing rings, adapter tongs, pressing
heads and expanding heads. There is a risk of injury.
● Comply with the maintenance regulations for the power tool and follow the
maintenance instructions for pressing tongs, Mini pressing tongs, pressing
rings, adapter tongs, pressing heads and expanding heads.
● Check the mains lead and any extension cable of the power tool regularly.
Have these renewed by qualified experts or an authorised ROLLER customer
service workshop in case of damage.
● Only allow trained persons to use the power tool. Apprentices may only use
the power tool when they are over 16, when this is necessary for their training
and when they are supervised by a trained operative.
● These power tools are not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities or lack of experience and
knowledge unless they have been given supervision or instruction concerning
the use of the power tool by a person responsible for their safety. Children must
be supervises to ensure that they do not play with the power tool.

Safety instructions for batteries

WARNING
Read all safety warnings and all instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
● Only use the battery in ROLLERʼS power tools and in the ROLLERʼS cord-
less LED lamp. Only then is the battery safe from dangerous overloading.
● Only use original ROLLERʼS batteries with the voltage specified on the
rating plate. Using other batteries can lead to injuries and risk of fire due to
exploding batteries.
● Use the battery and the rapid charger only in the specified operating
temperature range.
● Only recharge ROLLERʼS batteries in the ROLLERʼS rapid charger. There
is a risk of fire if an unsuitable battery charger is used.
● Charge the battery to full capacity in the ROLLERʼS rapid charger before
using for the first time. Batteries are delivered partly charged.
● Insert the battery into the battery compartment straight and without force.
There is a risk of bending the battery contacts and damaging the battery.
● Protect the battery against heat, sunlight, fire, moisture and wet. There is
a risk of explosion and fire.
● Do not use the battery in areas where there is a risk of explosion and in the
vicinity of inflammable gases, solvents, dust, fumes, liquids for example.
There is a risk of explosion and fire.
● Do not open the battery or modify its construction. There is a risk of explosion
and fire due to short-circuiting.
● Do not use batteries with damaged housings or damaged contacts. Damage
to or improper use of the battery can cause fumes to escape. The fumes can
irritate the respiratory tracts. Let in fresh air and consult a doctor in case of
symptoms.
● Fluid can leak from the battery when used improperly. Do not touch the
fluid. Leaking battery fluid can cause skin irritation and burns. Rinse off imme-
diately with water in case of contact. Also consult a doctor if the fluid gets into
the eyes.
● Observe the safety instructions on the battery and the rapid charger.
● Keep unused batteries away from paper clips, coins, keys, nails, screws
or other small metal objects which could cause bridging of the contacts.
There is a risk of explosion and fire due to short-circuiting.
● Remove the battery before stowing/storing the power tool for long periods
of time. Protect the battery contacts against short-circuiting, e.g. with a cap.
● Do not throw defective batteries in the normal household waste. Hand the
defective batteries over to an authorised ROLLER contract service workshop or
a recognised disposal company.
Explanation of symbols
WARNING
Danger with a medium degree of risk which could result in
death or severe injury (irreversible) if not heeded.
CAUTION
Danger with a low degree of risk which could result in minor
injury (reversible) if not heeded.
NOTICE
Material damage, no safety note! No danger of injury.
Read the operating manual before starting
Use eye protection
Use ear protection
Electrical device complies with protection class II
Environmental friendly disposal
eng