Improper Use; Personnel Qualifications - Aventics SERCOS III Mode D'emploi

AVENTICS | SERCOS III | R412012613–BDL–001–AC
2.3

Improper use

Any use other than that described under Intended use is
improper and is not permitted.
If unsuitable products are installed or used in safety-relevant
applications, this may result in unintended system operating states
that could lead to injuries and/or equipment damage. Therefore,
only use a product in safety-relevant applications if such use is
specifically stated and permitted in the product documentation. For
example, in areas with explosion protection or in safety-related
components of control systems (functional safety).
AVENTICS GmbH is not liable for any damages resulting from
improper use. The user alone bears the risks of improper use of
the product.
It is considered improper use when the product
W
is used for any application not stated in these instructions,
W
is used under operating conditions that deviate from those
described in these instructions or in the DDL system
description (R499050031) or
W
is changed or converted.
2.4

Personnel qualifications

The work described in this documentation requires basic
electrical and pneumatic knowledge, as well as knowledge of the
appropriate technical terms. In order to ensure safe use, these
activities may therefore only be carried out by qualified technical
personnel or an instructed person under the direction and
supervision of qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures, due to
their professional training, knowledge, and experience, as well
as their understanding of the relevant regulations pertaining to
the work to be done. Qualified personnel must observe the rules
relevant to the subject area.
45
Notes on Safety