Intended Use; Improper Use; Personnel Qualifications; General Safety Instructions - Aventics EtherNet/IP Mode D'emploi

AVENTICS | EtherNet/IP™ | R412012728–BDL–001–AC

2.2 Intended use

The Bus coupler is only intended for industrial applications.
The pressure regulator may only be used within the limits listed in the technical
data.
Intended use includes having read and understood this documentation, especially the
chapter "Notes on Safety".

2.3 Improper use

Any use other than that described under Intended use is improper and is not
permitted.
The installation or use of unsuitable products in safety-relevant applications can
result in unanticipated operating states in the application that can lead to personal
injury or damage to equipment. Therefore, only use a product in safety-relevant
applications if such use is specifically stated and permitted in the product
documentation. AVENTICS GmbH is not liable for any damages resulting from
improper use. The user alone bears the risks of improper use of the product.
It is considered improper use when the Bus coupler
are used for any application not stated in these instructions or
if it is used under operating conditions that deviate from those described in these
instructions.

2.4 Personnel qualifications

The work described in this documentation requires basic electrical and pneumatic
knowledge, as well as knowledge of the appropriate technical terms. In order to
ensure safe use, these activities may therefore only be carried out by qualified
technical personnel or an instructed person under the direction and supervision
of qualified personnel.
Qualified personnel are those who can recognize possible hazards and institute the
appropriate safety measures, due to their professional training, knowledge, and
experience, as well as their understanding of the relevant regulations pertaining
to the work to be done. Qualified personnel must observe the rules relevant to the
subject area.

2.5 General safety instructions

Observe the regulations for accident prevention and environmental protection
in the country where the product is used and at the workplace.
Do not modify or convert the device.
Only use the device within the performance range provided in the technical data.
Do not place any mechanical loads on the device under any circumstances. Do not
place loose objects on it.
This device may only be used for industrial applications (class A). An individual license
must be obtained from the authorities or an inspection center for systems that are
to be used in a residential area (residential, business, and commercial areas). In
Germany, these individual licenses are issued by the Regulating Agency for
Telecommunications and Post (Regulierungsbehörde für Telekommunikation und
Post, RegTP).
Ensure that the power supply is within the stipulated tolerance for the modules.
Observe the safety notes in the operating instructions for your valve system.
45
Notes on Safety