Intended Use; Improper Use; Personnel Qualifications - Aventics CANopen LP04 Mode D'emploi

24 AVENTICS | CANopen | R402001988–BDL–001–AC
For your safety
2.1

Intended use

O
The device is only intended for use in industrial applications.
If the device is used in domestic applications (domestic,
business, and commercial applications), then a permit must
be obtained from the authorities or test office. These
permits are issued in Germany by the Regulation Authorities
for Telecommunications and Post (RegTP).
O
Observe the performance limits listed in the technical data.
2.2

Improper use

It is considered improper use when the LP04 CANopen
W
is used for any application not named in these instructions,
W
is used under operating conditions that deviate from those
described in these instructions.
2.3

Personnel qualifications

Assembly and commissioning require basic electrical and
pneumatic knowledge, as well as knowledge of the appropriate
technical terms. Assembly and commissioning may therefore
only be carried out by qualified electrical or pneumatic
personnel or an instructed person under the direction and
supervision of qualified personnel.
Operation requires basic electrical and pneumatic knowledge,
as well as knowledge of the appropriate technical terms.
Operation may therefore only be carried out by qualified
electrical or pneumatic personnel or an instructed person under
the direction and supervision of qualified personnel.
Qualified personnel are those who can recognize possible
hazards and institute the appropriate safety measures due to
their professional training, knowledge, and experience, as well
as their understanding of the relevant conditions pertaining to
the work to be done. Qualified personnel must observe the rules
relevant to the subject area.