Delivery Contents - Aventics CANopen LP04 Mode D'emploi

26 AVENTICS | CANopen | R402001988–BDL–001–AC

Delivery contents

W
Plug connectors may not be plugged in or pulled out during
load. Switch off the power supply before connecting or
disconnecting plugs to avoid damaging the electrical parts.
W
In order to attain the correct protective class and be able to
use all the functions in the system, please take care that all
seals are whole and correctly placed.
The protective class can only be attained if all of the plug
connections that are not being used are closed (caps/
dummy plugs).
W
Switches and configurations may not be changed during
operation. Changed settings are only accepted once the
device has been switched off and on again.
W
No compensating current that is caused by potential
difference may flow through the shield, otherwise the mass
points of the system must be connected with a separate
cable.
W
Additional safety notes in the operating instructions must be
observed.
W
Dispose of the device in accordance with the currently
applicable regulations in your country.
3 Delivery contents
The delivery contents include:
W
1 completely mounted and tested VS according to
configuration
W
1 set of operating instructions Valve System LP04,
R402000482
W
1 set of operating instructions VS LP04 CANopen,
R402001988