Care And Maintenance; Servicing The Modules; Maintaining The Modules; Technical Data - Aventics EtherNet/IP Mode D'emploi

74 AVENTICS | EtherNet/IP™ | R412012728–BDL–001–AC

Care and Maintenance

9 Care and Maintenance
Applied electric voltage and high pressure!
Danger of injury from electric shocks and sudden pressure drops.
Make sure the system is not pressurized or connected to power before
carrying out any service or maintenance work.

9.1 Servicing the modules

Damage to the housing surface caused by solvents and aggressive detergents!
The surfaces and seals could be damaged by solvents or aggressive
cleaning agents.
Never use solvents or aggressive detergents.
Regularly clean the device with a damp cloth. Only use water or a mild
cleaning agent.

9.2 Maintaining the modules

The bus coupler and I/O modules for the VS are maintenance-free.
Comply with the maintenance intervals and specifications for the entire system.

10 Technical Data

10.1 Characteristics

General
Degree of protection according to
EN 60 529/IEC 529
Ambient temperature ϑ
Electromagnetic compatibility
Interference emission
Interference immunity
CAUTION
NOTICE
U
IP 65 when assembled
0°C to +50°C, without condensation
EN 61000-6-4
EN 61000-6-2