Service And Repairs; Cleaning And Servicing; Maintenance - Aventics SERCOS III Mode D'emploi

AVENTICS | SERCOS III | R412012613–BDL–001–AC

10 Service and Repairs

10.1 Cleaning and servicing

Damage to the surface caused by solvents and aggressive
detergents!
The surfaces and seals could be damaged by aggressive
solvents and cleaning agents.
O
Never use solvents or strong detergents.
O
Only clean the device using a slightly damp cloth. Only
use water to do this and, if necessary, a mild detergent.
O
Check that all seals and plugs for the plug connections are
firmly fitted so that no humidity can penetrate the bus
coupler during cleaning.

10.2 Maintenance

The bus coupler is maintenance-free. However, the seals of the
bus coupler may age faster under aggressive ambient
conditions. Defective seals will lead to pneumatic leaks and
non-compliance with the IP 65 protection class.
O
Regularly check that the seals on the bus coupler are in
perfect order. Establish the maintenance intervals
according to your ambient conditions and enter them in the
system-dependent maintenance plan.
O
Observe the system-specific maintenance intervals.
Service and Repairs
NOTICE
61