Maintenance And Care; Transport; Storage; Guarantee - ATIKA ATS 250 Instructions De Service

Suction

Maintenance and Care

Remove the mains plug before all
maintenance works
Observe the following to maintain the functionality of the
saw
• Clean and oil all moving parts regularly
Never use any grease!
Use for instance sewing machine oil, liquid hydraulic fluid
or environmentally acceptable spray oil.
•
Ensure that the saw blade remains free of rust and
resin
•
Remove all resin residues from the saw bench top
•
The saw blade is a wearing part and becomes blunt after
long or frequent use
⇒ renew the saw blade or have it sharpened
without suction
with suction
16

Transport

Remove mains plug
before each transport
The saw must only be transported with the saw blade
lowered and the protective cover in position.
This will avoid possible injury from the saw blade.
For safe transport
handling recesses are provided in the front and rear of the
table.

Storage

Remove the mains
plug from the socket
Store unused equipment in a dry, locked place out of the
reach of children.
To extend the service life of the saw and guarantee smooth
operation, before storing for a longer period
− thoroughly clean the saw
− treat all movable parts with an environmentally friendly
oil

Guarantee

We grant a guarantee of two years, commencing with the day
of delivery from the dealer's store, for material and
manufacturing faults.
Warranty claims, even during the warranty period, will not be
accepted for damages due to incorrect handling or inadequate
packaging during return of the devices or to a non-observance
of the operating instructions.
Faulty parts must be sent to our works, postage or freight free.
We reserve the right to decide upon free spare part delivery.
Guarantee work will be completed by us or an authorised
servicing agency. Guarantee damage can only be remedied by
another firm with our explicit approval.
The guarantee does not cover normal wear to: saw blade,
protective hood, sliding body, table insert.
Guarantee is also granted if original spare parts are used.
Subject to changes in the interest of technical progress.