Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Congratulations on your decision for the Happy Hunter.
This kit is designed for the advanced model builder.
Some experience in ship modeling is expected dur-
ing the construction of this model. Also the equipment
of the building kit allows the more experienced model
builder to equip the model with own ideas, extensions
and special functions.
Technical specifications
Overall length:
Overall beam:
Draught:
Displacement:
Scale:
Please see the separate sheet for details of adhe-
sives and essential items not included in the kit.
Refer to the main catalogue for details of tools and
aids to building.
Notes on the Fittings Set, No. ro1107, and the Power
Set, No. ro1108
These two sets are required to complete a scale model
Happy Hunter
Assembly and operating instructions
approx. 1035 mm
approx. 235 mm
approx. 120 mm
approx. 9500 g
1 : 50
© Klaus Krick Modelltechnik, Germany, Stand 06.2017
ship which is capable of running. We strongly recommend that
you obtain these sets before you start construction, as certain
parts have to be installed during the initial stage of building.
Sequence of assembly
The Happy Hunter is designed for the advanced modeller.
We therefore assume that the builder has considerable
experience, and the instructions do not describe prepara-
tory work in detail, such as separating laser-cut parts, drill-
ing holes, cutting strip and rod material to length, painting
individual components etc.
Some sections are only sketched in, and are intended jus-
tas a suggestion and motivation for your own ideas.
In general terms the sequence of assembly follows the
numbering of the kit components.
Please read through the whole of the building instructions
before you start building, referring to the Parts List, the
illustrations and the plans. You should have a clear un-
derstanding of each stage of construction before you start
work on the model.
Publicité
Table des Matières
