Télécharger Imprimer la page

Changing Container During Surgery; Changing Instrument During Surgery - Hologic Aquilex Instructions D'utilisation

Masquer les pouces Voir aussi pour Aquilex:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 125
WARNING!
Empty fluid bags
The empty fluid bags should remain on the hooks so that the measurement accur-
acy is not diminished.
WARNING!
Changing fluid bags
Fluid bags should be changed quickly to avoid affecting the accuracy of the deficit
calculation.

5.14 Changing Container during Surgery

The device system detects automatically the replacement of a container. The pump
will stop immediately, and the deficit display is locked to insure an accurate deficit
count is maintained. Brief fluctuations in the deficit calculation (< 10 s) may occur
when a container is replaced. The replacement of a container is indicated with the
message Container Change, Press Resume.
• Disconnect tubing from full containers.
• Immediately remove full containers from scale.
• Install new containers.
• Reconnect tubing to new containers.
• Press Pause/Resume button to resume procedure.
WARNING!
Container change during surgery
A container change during surgery is only allowed, if the container holds at least
0,5 liters of fluid. Otherwise, the deficit value may be falsified. In this case, the
manufacturer recommends manual deficit calculation.
WARNING!
Touching containers and their holders
Touching the containers and their holders as well as vibrations of the balancing
system should be avoided during surgery to prevent false detection of the con-
tainer change and not negatively affect the accuracy of the deficit calculation.
WARNING!
Change of the containers
Containers should be changed quickly to avoid affecting the accuracy of the deficit
calculation.
CAUTION!
Accuracy of the deficit
To avoid affecting the accuracy of the deficit calculation ensure that the first step
of the container change is to disconnect tubing from the full containers. Remove
full containers from the scale immediately after that.

5.15 Changing Instrument during Surgery

• Pause the pump by pressing Pause/Resume button.
• Press the Prime button for 2 seconds.
• Change the instrument.
System Operation
Container change during surgery
Instrument change during surgery
en
37 / 378

Publicité

loading