Burkert 8285 El. COND Mode D'emploi page 69

Diagnostics
Module diagnostics
Sensor monitor
Cal record
USP function
Diagnostics functions
General status information of the measuring system
Select menu: Diagnostics
Menu Display
Menu selection
Return to meas
Diagnostics
Message list
Logbook
Point of meas description
Device description
Module FRONT
Module BASE Module BASE
Return
Message list
Warn Current IV1 load
Return
Logbook
06/13/06 15:17 Measurement active
06/13/06 15:00 Diagnostics active
06/13/06 10:05 Measurement active
06/13/06 09:50 Parameter setting active
06/13/06 09:42 Wrong passcode
06/12/06 14:33 Measurement active
06/12/06 14:11 Parameter setting active
Return
0.002 mS/cm
23.7 °C
Select:
[enter]
Lingua
0.003 mS/cm
23.7 °C
Set favorite
0.003 mS/cm
23.7 °C
1 messg.
0.003 mS/cm
23.7 °C
Diagnostics functions
Call up diagnostics
From the measuring mode:
Press menu key to select menu.
Select diagnostics using arrow keys,
Confirm with enter.
The "Diagnostics" menu gives an
overview of all functions available.
Functions which have been set as
"Favorite" can be directly accessed
from the measuring mode.
Message list
Shows the currently activated
warning or failure messages in plain
text.
Logbook
Shows the last 50 events with date
and time, e.g. calibrations, warning
and failure messages, power failure
etc. This permits quality management
documentation to ISO 9000 et seq.
Extended logbook:
SmartMedia card (SW 8285-104)
69