Logbook; Factory Setting - Burkert 8285 El. COND Mode D'emploi

Logbook

Factory setting

Logook, Factory setting
Parameter setting/System control/Logbook
Note: Function check active
Menu Display
Logbook (Administrator)
Log failure
Log warning
Erase logbook
Return
Logbook
05/13/06 09:50 Measurement active
05/13/06 09:36 Parameter setting active
05/12/06 17:52 Measurement active
05/12/06 17:44 Parameter setting active
05/12/06 17:40 Wrong passcode
05/12/06 17:04 Measurement active
05/12/06 16:53 Diagnostics active
Return
Factory setting (Administrator)
The factory setting erases
all your set parameters!
Set factory setting
Return
54
Logbook, factory setting
7.03 pH
Logbook
24.8 °C
Select which messages are to be
logged in the logbook. The last 50
Yes
No
Yes
No
events are recorded with date and
time.
This permits quality management
documentation to ISO 9000.
The logbook can be called up from
7.03 pH
the diagnostics menu (Fig.).
24.8 °C
Additional function SW 8285-104:
Extended logbook for recording data
on SmartMedia card (TAN).
Factory setting
7.03 pH
24.8 °C
Allows resetting the parameters
to their factory setting. When this
menu is opened, the analyzer
displays a warning (Fig.).
Yes No
8285