Passcode Entry; If You Lose The Administrator Passcode; To Change A Passcode - Burkert 8285 El. COND Mode D'emploi

Passcode entry

Enter passcode:
Select the position using the left/right keys,
then edit the number using the up/down keys.
When all numbers have been entered, confirm with enter.

To change a passcode

• Open the menu selection (menu)
• Select parameter setting
• Administrator level, enter passcode
• Select System control: Passcode entry
Menu Display
Passcode entry (Administrator)
cal
Calibration
maint
opl
Passcode entry (Administrator)
cal
Change passcode
maint
opl
Return
10.54 mS/cm
25.6 °C
On Off
If you lose your
adm passcode, system
access will be locked!
Close OK
10.54 mS/cm
25.6 °C
Calibration
On Off
1147
Maintenance On
Off
Operator level Off
On
Info
System control:
Passcode entry
Changing a passcode:
"Passcode entry" menu
When this menu is opened, the
analyzer displays a warning (Fig.).
Passcodes (factory settings):
Calibration
Maintenance
Operator level
Administrator level 1989
If you lose the Administrator
passcode, system access is locked!
Please consult our technical support!
To change a passcode
Select "On" using arrow keys,
confirm with enter.
Select the position using the left/
right keys,then edit the number
using the up/down keys.
When all numbers have been
entered, confirm with enter.
1147
2958
1246
21