Burkert 8285 El. COND Mode D'emploi page 41

Documenting the parameter setting
From the application window of the Excel file, select the worksheet for the
module the parameter settings of which you want to document.
Set the parameters of the respective module and enter the selected values in
the corresponding cells of the module worksheet.
Caution!
During parameter setting the "function check"
Display
mode is active.
Function check. The NAMUR "function check" contact is active (factory setting: Module
BASE, Contact K2, N/O contact). Current output response is user-defined:
• Currently measured value: The currently measured value appears at the current output
• Last measured value: The last measured value is held at the current output
• Fixed 22 mA: The output current is at 22 mA
41