Handling And Lifting; Engine Storage - VM Motori D700 Série Manuel D'instructions

HANDLING AND LIFTING

Secure the engine with a lifting device (lift-
ing beam) of appropriate capacity.
Hook the lifting device to the fixing points as
shown in the figure.
Before carrying out the lifting, identify the
barycentre position of the load.
GB

ENGINE STORAGE

If the engine is left idle for prolonged peri-
ods, check the possible conditions of con-
servation in relation to the storage area and
the type of packaging.
Avoid any environment exposed to damp-
ness or to the inclemency of weather.
English
Important
The brackets of the fixing points have
been designed to lift the engine only
without any additional weight. Do not lift
the engine using a different procedure
from the prescribed one; otherwise, the
warranty for damages will be invalidated.
The manufacturer supplies the engine with
a protection treatment which is valid for 6
months from the delivery date.
After the first 6 months, if the engine is not
used, it is necessary to carry out a specific
maintenance to extend the storage period
for a further 6-month period.
The information related to the extension of
the storage period are included in the gener-
al warranty conditions.
- 28 -
Handling and installation information
D700/750 E2-E3
IDM-45300901000.tif