Procedure To Request Technical Assistance; Warranty Conditions; Attached Documentation - VM Motori D700 Série Manuel D'instructions

The engine is supplied with a copy of
the engine ID plate and a copy of the
EPA (Environmental
Agency) adhesive data plate, which
is affixed to the flywheel housing.
The EPA data plate indicates the en-
gine's conformity with the laws of
California and other states which
adopt the same legislation.
When setting up and installing the
engine, the engine ID plate and EPA
data plate must be affixed in a prom-
inent position and must be easily leg-
ible.

PROCEDURE TO REQUEST TECHNICAL ASSISTANCE

Please state the data contained in the iden-
tification plate, the serial number, approxi-
mate hours of operation and the type of
defect detected in every request of technical
assistance for the engine.
In case of need, please apply to the manu-
facturer's Technical Assistance Service or

WARRANTY CONDITIONS

The warranty conditions are stated in the at-
tached documentation
sheet").

ATTACHED DOCUMENTATION

The stated documentation is supplied to the
client along with this manual.
– Wiring diagrams
English
Protection
(See "Warranty
- 5 -
to an authorised workshop (See attached
documentation "Address booklet of assist-
ance and spare part centres").
Further information are available in the web-
site: www.vmmotori.it, in the "Contacts –
Request Info" section.
– Address booklet of assistance and spare
part centres
– Warranty sheet
D700/750 E2-E3
IDM-45300902800.tif
General information
GB