ELSA LANCOM Business Manuel De L'utilisateur page 275

SrcAddr: 00000001 0123456789ab 0455
Filter
The IPX router has received a NetBIOS frame (IPX-socket 455) from the local
network, which is to be forwarded as broadcast ffffffffffff to all stations in network
00000001. Because a filter has been set on the socket, the frame is rejected by the
router.
Online Trace'RIP'
The outputs under 'RIP' describe the processing of IPX routing information protocol
frames by the RIP process of the IPX router. The trace outputs are displayed in the
following format:
Format: [Source interface] [Receive/Transmit/Action] [Source node address] [Frame
type] [Para.] [Network address] [Hops] [Tics] [Action] ... [Network address] [Hops]
[Tics] [Action]
Example:
LAN-Rx node: 0000c0123456 Req: 00000002
An RIP request for the IPX network 00000002 is received from the local network.
The RIP request was sent from the IPX node 0000c0123456.
Example:
LAN-Rx node: 00a057123456 Resp
Route: 00000002 Hops: 0001 Tics: 0002 Up
An RIP response (routing information protocol response) was received from the local
network (generated by the IPX node 00a057123456). With this response route
00000002, with a hop distance (number of interim stations) of 1 and a tic distance
of 2, is entered as available again in the RIP table.
LAN update
The RIP process sends all required routing information to the local network.
Online Trace'SAP'
The outputs under 'SAP' describe the processing of IPX service advertising protocol
frames by the SAP process of the IPX router. The trace outputs are displayed in the
following format:
Format: [Source interface] [Receive/Transmit/Action] [Source node address] [Frame
type] [Para.] [Service type] [Server name] [Action] ... [Service type] [Server name]
[Action]
Example:
LAN-Rx node: 00a057123456 response
0004 FS_development up
ELSA LANCOM Business Internal
ELSA LANCOM Business
R99