Firmware - ELSA LANCOM Business Manuel De L'utilisateur

R80 Description of the menu options
For automatic time comparison when the module is switched on, a previously specified
remote station is called directly and the time information is taken from the ISDN network.
So long as the time module is switched on, the time will be taken from the ISDN every
time the router establishes a connection.
The time module has the following layout:
/Time-module
Operating
Current-time
Time-call-number
Call-attempts

Firmware

The various firmware parameters can be called up and a firmware upload started from
this menu:
/Firmware
Version-table
Table-firmsafe
Mode-firmsafe
Timeout-firmesafe
Test-firmware
Firmware-upload
Version table
The version table displays the firmware version and serial number of the device.
Ifc
Ifc
ELSA LANCOM Business
Time module settings
Activating the module: On, Off
Displays the current time in the device.
Call number to which a connection must be established to receive
time information from the ISDN.
Number of possible attempts to receive time information
Module
LANCOM Business 4100
Display and keyboard settings
Displays hardware releases and serial numbers for the router
Information on the two firmware versions stored in the device
and on the bootloader.
Firmware activation mode
Time in minutes required to test new firmware
Tests the inactive firmware
Initiates a firmware upload
Version
1.60.0012 / 30.06.1999
Serial-number
8427.000.020