The Script List; Compuserve Select - ELSA LANCOM Business Manuel De L'utilisateur

R92 ELSA LANCOM Business Internal

The Script List

Scripts are entered in a script list table provided for that purpose. This table is in the
/Setup/WAN-module and has the following structure:
Device name
CSERVE
The entries in the script list have the following meaning:
Device name:
Script:
Example:
Device name
CSERVE#1
CSERVE#2
In the ELSA LANconfig the script list is on the 'Communication' tab.

CompuServe Select

The settings required for selection on the CompuServe network via X.75, asynchronous
PPP and script control with an example.
Layer list:
WAN-layer
CSERVE
Name list:
Device name
CSERVE
ELSA LANCOM Business
Script
<>[Host]<CIS>[User]$U[Password]$P[PPP]$C
Name of the logical remote station.
All commands to be executed—a maximum of 58 characters per line is availa-
ble. If the required command sequence is longer, another entry similar to the
RoundRobin list for the logical remote station may be added. The syntax for this
is: Device name followed by '#' and a number. The entries are processed from
top to bottom.
Script
<>[Host]<CIS>[User]
$U[Password]$P[PPP]$C
Encaps. Lay-3
TRANS SCAPPP
Dialup-remote B1-DT
0021194260 60
Lay-2 L2-Opt. Lay-1
X.75LAPB none HDLC64K
B2-DT WAN-layer
60 CSERVE
Callback
Off