ELSA LANCOM Business Manuel De L'utilisateur page 186

R10 Description of the menu options
/PPP-statistics
BACP-statistics
Rx-options
Tx-options
Delete-values
The PPP statistics provide detailed information on the phases of a PPP negotiation,
particularly in the event of connection problems with external products. It provides
important information for error diagnosis.
PPP-phases For each available interface, the Status/PPP-statistics/PPP-phases option provides
a list of the current states of PPP protocol negotiation. The table maintained here has
the following layout:
Ifc
Ch01
Ch02
Below is a detailed description of the meaning of each field:
Ifc
Phase to
LCP
IPCP
IPXCP
CCP
The current PPP phases are shown under Status/PPP-statistics/PPP-phases. As
specified above, these phases are the idle (Dead), ready (Establish), access parameter
verification (Authenticate) and network phase (Network). In the substatistics, the frames
exchanged are encrypted separately by type and quantity.
Status/PPP-statistics/LCP-statistics
The LCP (Link Control Protocol) negotiates the basic features of the PPP connections. The
LCP frames exchanged during PPP negotiation are recorded in statistics and displayed by
type and quantity. If the LCP does not change to the OPEN state for a connection, these
statistical values provide information on errors that occurred during the initial phase of
ELSA LANCOM Business
Running status displays
Displays PPP/BACP statistics
Displays the LCP, IPCP and IPXCP information received
Displays the LCP, IPCP and IPXCP information sent
Deletes PPP statistics.
Phase to LCP IPCP
DEAD Initial Initial
DEAD Initial Initial
Designates the associated channel.
Indicates the current phase of the PPP. The possible values are AUTHENTICAT,
NETWORK and TERMINATE.
Status of the 'Link Control Protocol' subprotocol. The possible values are: Initial,
Starting, Stopping, Stopped, Closing, Closed, ReqSent, AckRcvd, AckSent
and Opened.
Similarly to 'LCP', displays the status of the 'IP Control Protocol' subprotocol.
Similarly to 'LCP', displays the status of the 'IPX Control Protocol' subprotocol.
Similarly to 'LCP', displays the status of the 'Compression Control Protocol' subpro-
tocol.
IPXCP CCP
Initial Initial
Initial Initial