ELSA LANCOM Business Manuel De L'utilisateur page 242

R66 Description of the menu options
The menu has the following layout:
/Routing-method
Routing-method
ICMP-routing-method
Routing-method This option allows you to define the routing method used for IP packets:
If you select 'Normal', all IP packets are handled in the same way as per the routing
specifications of the Internet protocol.
If you select 'Type-of-service', IP packets are placed in the urgent queue or reliable
queue, depending on the contents of the 'Type-of-service' field. All other packets
are placed in the normal send queue. In this way, transmission is guaranteed,
provided that it is possible.
ICMP-routing- This option allows you to define the routing method used for ICMP packets:
method
If you select 'Normal', the ICMP packets are handled like any other IP packets as per
the routing specifications of the Internet protocol.
If you select 'Reliable', all ICMP packets received are placed in the reliable queue.
Setup/IP-router-module/RIP-configuration
This option allows you to enter settings for the management of IP-RIP packets. The menu
has the following layout:
/RIP-configuration
RIP-Type
R1-mask
Table-IP-RIP
RIP-type This option allows you to select the method to be used for handling the IP-RIP packets.
The different settings have the following meaning:
Off: IP-RIP is not supported (default).
RIP-1: RIP-1 and RIP-2 packets are received but only RIP-1 packets are sent.
R1-comp: RIP-1 and RIP-2 packets are received. RIP-2 packets are sent as an IP
broadcast.
RIP-2: Same as R1-comp except that all RIP packets are sent to the IP multicast
address 224.0.0.9.
ELSA LANCOM Business
Routing method settings
Routing method for IP packets
Routing method for ICMP packets
Settings for IP-RIP operation
RIP compatibility switch
Management of network masks
Dynamic IP routing table