Setup/Tcp-Ip-Module - ELSA LANCOM Business Manuel De L'utilisateur

Spoofing This option allows you to determine how the router will handle SAP packets.
If you select Off, SAP packets are handled in the WAN in precisely the same manner
as in local networks. SAP data are sent to the remote side in the event of new
information and at intervals of one minute, i.e. a connection is established.
With the Trig setting, the SAP data is sent to the remote end any time changes are
detected.
With the Time setting, the SAP data is sent to the remote end at selectable
intervals (see below).
pBack (default) is the most economical setting. In this case, the SAP data is sent
to the remote end only when a connection is activated.
When spoofing is set to pBack, entries in the RIP table age only when a new connection
is established and an entry has been explicitly marked as 'not reachable'.
WAN-update- The periodic transfer interval for a spoofing time control in which SAP data can be
min.
transferred to the remote side is given here. You can enter a value from 1 to 60 minutes;
the default value is 5.

Setup/TCP-IP-module

This menu allows you to enter settings for the TCP/IP module. The menu has the
following layout:
/TCP-IP-module
Operating
IP-address
IP-netmask
Intranet addr.
Intranetmask
Access-list
DNS-default
DNS-backup
NBNS-default
NBNS-backup
Table-ARP
ARP-aging-min.
TCP-aging-min.
TCP-max.-conn.
Description of the menu options
TCP/IP module settings
Activates or deactivates the TCP/IP module.
Local IP address
Local network's matching IP network mask
Local Intranet address
Local network's matching Intranet network mask
Restricts access to internal functions via TCP/IP.
Domain name server
Backup domain name server
NetBIOS name server
Backup NetBIOS name server
ARP table for mapping an IP address onto a MAC address
Dwell time for entries in the ARP table
Time limit for configuration connections that are inactive
Max. number of simultaneous configuration connections to the
ELSA LANCOM
ELSA LANCOM Business
R57