ELSA LANCOM Business Manuel De L'utilisateur page 216

R40 Description of the menu options
This table contains the interface settings that apply to the router modules of the ELSA
Router-
interface-list
LANCOM .
Ifc
S0
Below is a detailed description of the meaning of each field:
Ifc
MSN-EAZ
YC.
CLIP
Channel list The channel list specifies the number and sequence of the channels to be established.
Device-name
LONDON
INTERNET
DEFAULT
Below is a detailed description of the meaning of each field:
Device-name
Min
ELSA LANCOM Business
MSN/EAZ YC.
123456 Off
Designates the associated interface.
If your device is connected to an ISDN port with 1TR6, enter the EAZ to which the
interface is to respond.
If your device is connected to an ISDN port with DSS1, enter the MSN to which the
interface is to respond. If you wish the interface to respond to several different MSNs,
enter them here separated by semicolons. A '#' in the list enables any number of
incoming MSNs.
For outgoing calls, the first MSN in this list will be reported to the remote station. If no
MSN is entered, the switching center sends the main MSN of the terminal.
This entry can be used to control the interface's ability to establish Y connections.
Possible settings are:
On: Y connection is supported; a number of connections can be established
simultaneously (default). A channel bundling connection is broken off when a second
connection to another remote station has to be established.
Refer also to the settings for the availability of the LANCAPI .
Off: Y connection not supported; only one connection can be established. The second
connection is blocked. If a connection to an additional remote station is to be
established, this establishment is rejected. A channel bundling connection is not
affected.
Calling Line Identification Protocol: Suppresses the outgoing MSNs.
Possible values:
Yes: Activate CLIR, do not send MSN.
No: Deactivate CLIR, send MSN to remote station.
Please note: The "selective suppression of call number transmission" may be a service
feature that will have to be obtained from the telephone company.
Min
2
2
1
Name of the remote station that is also used in the name and PPP lists.
Number of static channels. These channels are used during every call establishment
to the remote station.
CLIP
On
Mx Order
2 1-1;1-2
2 1-1;1-2;2-1;2-2
2 0
Backup
1
0