Online Trace Outputs; General - ELSA LANCOM Business Manuel De L'utilisateur

PPP list:
Device name Authent.
CSERVE none
The CompuServe account is to be entered for xxxxxx,xxxx.
Script list:
Device name Script
CSERVE <>[Host]<CIS>[User]$U[Password]$P[PPP]$C
The script elements have the following meaning:
Element Meaning
<> Start script on the remote station by sending a carriage return.
[Host] Wait for the answer from the CompuServe node.
At some point the
<CIS> '
Send CIS' followed by a carriage return.
[User] Wait for the answer. CompuServe requests the 'User ID'.
$U Send the user name. For CompuServe this consists of the CompuServe
User ID with attached '/PPP:CISPPP'.
The user name is taken from the PPP table and sent to the remote station
with a final carriage return.
[Password] Wait for the password query.
$P Send the password followed by a carriage return.
The password will be taken from the PPP table.
[PPP] Wait for the connect message from the remote station.
$C The script is fully processed. The asynchronous PPP negotiation (SCAPPP)
in the layer list is started.

Online Trace Outputs

General

With so-called 'online trace outputs' (control outputs) the user can receive information
on internal processes of a working ELSA LANCOM . Such information can aid in finding
erroneous configurations easily and securely, both from ELSA LANCOM and from other
devices connected with an ELSA LANCOM .
The online trace outputs can be flexibly administered for individual protocols and
functions in the firmware and individual configuration sessions. With session-based
"Trace Profiles" only the trace information activated within a session is displayed.
ELSA LANCOM Business Internal
Key Time
* 0
'
Host Name' will appear in the answer.
Rep. User-name
0 xxxxxx,xxxx/PPP:CISPPP
ELSA LANCOM Business
R93