Setup/ Lancapi -Module - ELSA LANCOM Business Manuel De L'utilisateur

R76 Description of the menu options

Setup/ LANCAPI -module

Configuring LANCAPI basically involves answering two questions:
What call numbers from the telephone network should LANCAPI respond to?
Which of the computers in the local network should be able to access the telephone
network via LANCAPI ?
Via which UDP port do the LANCAPI server and LANCAPI clients communicate?
The LANCAPI module has the following layout:
/LANCAPI-module
Access-list
Interface-list
Priority-list
UDP-port
Access-list This option allows you to limit the circle of computers permitted to use the LANCAPI .
This table can have a maximum of 16 entries. If the table is empty, all computers can
access the LANCAPI .
Interface-table The interface table appears as follows:
Ifc
S0-1
The fields of the table have the following significance:
Ifc
Operating
EAZ-MSN(s)
Force-Out-MSN
Priority-table The priority for a port controls the option for breaking outgoing connections via the
LANCAPI router connections. Option '1' does not break router connections, the setting
'2' breaks only auxiliary connections of a router connection with channel bundling, the
selection '3' also breaks main channels of a router connection.
ELSA LANCOM Business
LANCAPI settings
List of computers allowed to use the LANCAPI
Activation of the LANCAPI for the various interfaces and
specification of the various subscriber numbers to which the
LANCAPI should respond.
Priority for the LANCAPI versus router connections
UDP port for communication between the LANCAPI server and
clients
Operating EAZ-MSN(s)
Outgoing 123456
Designates the associated interface
This item determines whether LANCAPI operation is permitted on this interface
for outgoing calls, incoming and outgoing calls (On) or whether LANCAPI opera-
tion is disabled completely (Off).
Enter the EAZs or MSNs on which the LANCAPI should respond to incoming calls
here; these EAZs/MSNs will also be displayed to the exchange during outgoing
calls.
If no outgoing MSN has been configured for the CAPI application, this item can be
used to determine whether the LANCAPI transfers the first EAZ/MSN on the list.
Force-Out-MSN
no