Status/Layer-Connection; Status/Call-Info-Table - ELSA LANCOM Business Manuel De L'utilisateur

Dialup- Indicates the call number of the remote station from the name list.
remote
Device-name Indicates the logical name of the remote station (if it can be detected). The device
name is also displayed on the appropriate display line as soon as a logical connection
is established.
B1-DT Indicates the short timeout for the connection.
B2-DT Indicates the short timeout for bundled channels for this connection.

Status/Layer-connection

The menu item Status/Layer-connection has information on the B-channel protocol
used on the interface for every available interface. The entries in this table correspond
to those in the layer list Setup/WAN-module/Layer-list in the WAN module. An
additional entry exists for the interface itself. The menu has the following layout:
Ifc WAN-layer
Ch01 DEFAULT
Ch02 PPPHDLC

Status/Call-info-table

This table displays the last ten incoming calls, regardless of whether the router answered
these calls.
This allows you, for example, to determine the internal MSN used when the system is
operated in connection with a PBX. The table has the following layout:
System-Time Ifc CLIP-Caller
0T; 00:20:57 S 5678
0
0T; 00:20:46 S 4321
0
0T; 00:19:47 S 4321
0
0T; 00:11:33 S 5678
0
0T; 00:01:13 S 4321
0
0T; 00:01:02 S 4321
0
0T; 00:00:06 S 5678
0
The different entries have the following meaning:
System-time Time when the call came. Either the device operating time or the system time of
the ISDN is displayed (if made available from the ISDN terminal).
Ifc Designates the associated interface.
CLIP-Caller Call number (CLIP) of the caller
Description of the menu options
Encaps. Lay-3 Lay-2
ETHER ELSA X.75ELSA
TRANS TRANS PPP
Dial-Caller
1234
1234
1234
1234
1234
1234
1234
L2-Opt. Lay-1
compr. HDLC64K
none HDLC64K
Capab. B-chan.
HDLC64K 2
HDLC64K 1
HDLC64K 1
HDLC64K 1
HDLC64K 2
HDLC64K 1
HDLC64K 1
ELSA LANCOM Business
R33