Setup/Netbios-Module - ELSA LANCOM Business Manuel De L'utilisateur

R72 Description of the menu options
– unkn.: While verifying uniqueness, it was determined that the address has
– stat.: A computer has informed the DHCP server that it has a fixed IP address.
– dyn.: The DHCP server assigned an address to the computer.

Setup/NetBIOS-module

The Setup/NetBIOS-module menu contains the settings for the NetBIOS module. The
menu has the following structure:
Operating
Scope-ID
NT-Domain
Remote-table
Group-list
Host-list
Server-list
Watchdogs
Update
WAN-Update-Min.
Scope-ID The Scope-ID menu item can be used to specify the NetBIOS scope in which the device
is located. It then sees only those NetBIOS packets originating in the same NetBIOS
scope; all other packets are automatically rejected. The scope ID is only used in
conjunction with Windows name servers (WINS). This entry can generally be left blank.
NT-Domain A workgroup/domain can be specified in the NT domain item to trigger the search
procedure when starting the NetBIOS module. This is required if the network does not
contain any computers running Windows 95 or Windows 98.
Remote-table All remote stations that are to provide or receive NetBIOS information must be entered
in the remote-table. When the NetBIOS module is switched on, NetBIOS packets from
remote stations other than those specified will be rejected automatically. The remote-
table has the following structure:
Name
GLASGOW
ELSA LANCOM Business
already been assigned to another computer. Unfortunately, the DHCP server has
no means of obtaining additional information on this computer.
This address can no longer be used.
Type
Router or workstation
On or off
NetBIOS scope in which the router is located.
Workgroup/domain in which the router is located.
All remote stations with which NetBIOS information is to
exchanged must be entered in the remote-station table.
All workgroups known to NetBIOS are recorded in the group
list.
All computer names known to NetBIOS are recorded in the
host list.
All servers that have logged onto the network are recorded in
the server list.